If you are not 100% happy with your mitered corners this little tutorial will help. Each step is clearly photographed. If winging it hasn't resulted in success every time you might want to incorporate some of these steps. It works whether you finish off your binding by machine or hand. One thing to note--if you adjust your seam allowance to wider than 1/4 inch (I use 3/8") you will need to mark the corner the same. You will understand that when you get to that part of the tutorial.
Thanks I usually do three out of four corners perfectly and the forth one always evades me. 😆
ReplyDeleteHa ha. I could say that goes for everything in my case--matching points, poking out corners, edge stitching, etc.
ReplyDelete